MicroPilot

MicroPilot Autopilot Users Group

Installing Your Autopilot (8)

Discussions Replies Latest Activity

MP2028 G2 does not power on

Hi Everyone. I applied a power of 12.4V to my MP2028. However, the LED did not turn on. And I checked the power input of the sensor install…

Started by Keukhee Bang

1 May 9
Reply by Evan Schellenberg

Using the new secondary COM port

Support for a secondary COM port was added to the autopilot recently. This is a port that always existed on G2 hardware but was not enabled…

Started by Evan Schellenberg

0 May 7

GPS Transition Cable MP2128G2

Hello, I have questions regarding the GPS transition cable attached on the MP board. What type of cable does it use? What is the Hirose / D…

Started by Arsyi Patriannisa

2 Apr 8
Reply by Arsyi Patriannisa

Safety

Hi everyone, I have some questions about micropilot.I used MP2128LRC2 Heli Autopilot 900 MHz, and Tarot 650 as the vehicle.We chose Quadrot…

Started by Siti Vivi Octaviany

2 Dec 18, 2018
Reply by Siti Vivi Octaviany

Wire Rope Vibration Isolators

Vibration isolation is an important part of the physical autopilot installation. We have found that wire rope isolators work well for this…

Started by Evan Schellenberg

0 Sep 26, 2017

"G2x" .bin files

Hello everybody! Looking inside Horizon's installation folder I can see a set of four .bin files (normal, FL, heli, heli3x) containing "G2"…

Started by Stefano Caburosso

2 Jun 3, 2016
Reply by Stefano Caburosso

Use of TPU lines to communicate with things.

We have been sponsored a cm100 gimbal from uav vision (awesome gimbal, thanks guys!) however we can't communicate with it (not the gimbal's…

Started by Anthony Banks

2 Aug 7, 2014
Reply by Anthony Banks

Trying to Move My Micro Pilot to a Telemaster 40

I am trying to move my MP to a larger air frame and would like to know if anyone has any files for doing this? I have had this system for 5…

Started by James R Pimley

9 May 5, 2012
Reply by Rory Paul

RSS

Share

© 2019   Created by MicroPilotNingAdmin.   Powered by

Report an Issue  |  Terms of Service