"Thank you so much"
MicroPilot Autopilot Users Group
ฺิBoonsarm Pooalai's Discussions
RTK for mp2128g2
5 Replies
If I'm going to use RTK with micropilot mp2128 g2, which model can I use now? Because I was asked last time, the 615 is now discontinued, I'm interested in the 719, but there are many series. which…Continue
Started this discussion. Last reply by ฺิBoonsarm Pooalai Nov 10, 2021.
connect to mp2128g2 failed
1 Reply
Hi guyI try to connect to mp2128g2 but failed, status as in the picture Which was not previously If this is the case, how to fix it?Continue
Started this discussion. Last reply by Yu Zhao Sep 21, 2020.
MP 2128heli for Drone
1 Reply
Hi guyNow I have MP2128g2 use for my Fix wings but, I have plan to make Drone for InspectionI have a question1. Can I use MP2128heli to replace the DJI board in the M600 model?2. In the auto flight…Continue
Started this discussion. Last reply by Evan Schellenberg Jun 21, 2019.
GNSS RTK with mp2128g2
9 Replies
้hi guyI can use external gps rtk with mp2128g2 board and then how to install it to use.Continue
Started this discussion. Last reply by ฺิBoonsarm Pooalai May 24, 2018.
Gifts Received
ฺิBoonsarm Pooalai has not received any gifts yet
ฺิBoonsarm Pooalai's Page
Latest Activity
"I tested with 2128g2.5, which is a newer version. But mp2128g2 should be able to use OEM7. As OEM7 and OEM 6 are using the same signal type.
For the model, sorry I am not an expert on that. I only have some general knowledge of RTK. I am…"
"I have list of Novatel model. Which one do you recommend for mp2128 g2 ?"
"Tested on mp2128g2, right? I want to use fine coordinates for high resolution mapping processing. Which one do you recommend?
Thank you"
"We have tested Novatel OEM 718D. As I know OEM 719 does work as well.
It depends on your requirements. Which band L1, L2,. etc, do you want? How accuracy? Which satellite are you going to use? Do you need the dual antenna one for heading? And…"
RTK for mp2128g2
If I'm going to use RTK with micropilot mp2128 g2, which model can I use now? Because I was asked last time, the 615 is now discontinued, I'm interested in the 719, but there are many series. which one do i needSee More
"Hi Boonsarm,
This might be the baud rate. When the baud rate is not matched, terminal shows unreadable characters. You could try to set up the baud rate to 57600 and have a try. Also, use the manual as a reference is a good idea. "
connect to mp2128g2 failed
Hi guyI try to connect to mp2128g2 but failed, status as in the picture Which was not previously If this is the case, how to fix it?See More
"Hello Sammy,
1. The autopilot could control the air frame itself, but it may not be compatible with the existing DJI electronics. The autopilot uses PWM for controlling the ESCs, and I can't say for sure if the DJI ESCs will be compatible.…"
MP 2128heli for Drone
Hi guyNow I have MP2128g2 use for my Fix wings but, I have plan to make Drone for InspectionI have a question1. Can I use MP2128heli to replace the DJI board in the M600 model?2. In the auto flight Can fly to set WPT vertically?3. Is there any place to make a Drone that uses micropilot?Thanks for all answerSammySee More
Profile Information
- Autopilot Serial Number(s)
- 16-00084
- Organization that your autopilot was purchased though
- Centrovision
ฺิBoonsarm Pooalai's Photos
Comment Wall
- No comments yet!
About
Share
© 2024 Created by MicroPilotNingAdmin.
Powered by
