MicroPilot

MicroPilot Autopilot Users Group

Kevin Surminski's Discussions (54)

Search Forum

View

Discussions Replied To (48) Replies Latest Activity

"Hi Janusz, Those errors usually come up when the THWIL starting procedure isn't fol…"

Kevin Surminski replied Sep 21, 2023 to MP 2128G2 Heli Sensors calibration

 83 Jan 4, 2024
Reply by Janusz Ochoński

"Hi Yuri, Glad I could help.  Regards, Kevin Surminski"

Kevin Surminski replied Nov 4, 2015 to Rudder at climb

 7 Nov 4, 2015
Reply by Kevin Surminski

"Hi Yuri, Yes, the rudder from Y accl PID gain values are negative. This is correct.…"

Kevin Surminski replied Oct 29, 2015 to Rudder at climb

 7 Nov 4, 2015
Reply by Kevin Surminski

"Hi Yuri, In the vibration analyzer, you probably want the maximum values of acceler…"

Kevin Surminski replied Oct 22, 2015 to Rudder at climb

 7 Nov 4, 2015
Reply by Kevin Surminski

"Hi Yuri, In flight, the rudder from yacc loop is active. if you plot the throttle v…"

Kevin Surminski replied Oct 21, 2015 to Rudder at climb

 7 Nov 4, 2015
Reply by Kevin Surminski

"Gyro temperatures do not change: During the power on self test (POST), the autopilot…"

Kevin Surminski replied Aug 7, 2014 to Fatal Error - Gyro temperatures do not change

 1 Aug 7, 2014
Reply by Kevin Surminski

"Here's one way to do it: For the heartbeat, set up a TPU line to digital output. Th…"

Kevin Surminski replied Aug 7, 2014 to Sending a heartbeat or serial status string from MP2128g

 3 Aug 7, 2014
Reply by Kevin Surminski

"Which pin coming out of the servo board were you trying to use?"

Kevin Surminski replied Aug 7, 2014 to Use of TPU lines to communicate with things.

 2 Aug 7, 2014
Reply by Anthony Banks

RSS

About

MicroPilotNingAdmin created this Ning Network.
Create a Ning Network! »

Share

© 2025   Created by MicroPilotNingAdmin.   Powered by

Report an Issue  |  Terms of Service