Comments - - MicroPilot2024-03-28T18:54:31Zhttp://micropilot.ning.com/profiles/statuscomment/feed?attachedTo=5292389%3AStatus%3A18803&xn_auth=noHello,
If the RC receiver and…tag:micropilot.ning.com,2018-10-24:5292389:Comment:188042018-10-24T17:11:53.685ZEvan Schellenberghttp://micropilot.ning.com/profile/EvanSchellenberg
Hello,<br />
If the RC receiver and servo board are powered from the same battery as the autopilot, then you do not need any extra ground wires to go with the signals. So the servo board to autopilot ground line on the P1 connector should be disconnected, and the RC receiver to autopilot connection does not need a ground.
Hello,<br />
If the RC receiver and servo board are powered from the same battery as the autopilot, then you do not need any extra ground wires to go with the signals. So the servo board to autopilot ground line on the P1 connector should be disconnected, and the RC receiver to autopilot connection does not need a ground.