"Hello,
The LEDs should light up when power is applied so that indicates there is an issue preventing that.
If you have verified the connections and power source then the board may be damaged and failing to turn on.
You should receive an e-mail from…"
MicroPilot Autopilot Users Group
Keukhee Bang's Discussions
MP2028 G2 does not power on
1 Reply
HiEveryone.I applied a power of 12.4V to my MP2028.However, the LED did not turn on. And I checked the power input of the sensor installed on each board, but the power does not come on normally.I…Continue
Started this discussion. Last reply by Evan Schellenberg May 9, 2019.
Gifts Received
Keukhee Bang has not received any gifts yet
Keukhee Bang's Page
Latest Activity
MP2028 G2 does not power on
HiEveryone.I applied a power of 12.4V to my MP2028.However, the LED did not turn on. And I checked the power input of the sensor installed on each board, but the power does not come on normally.I checked that the wiring was OK and checked that P2 connector 1, 2 were OK.If you have experience and have solved it, please give us your opinion.Thank youSee More
Profile Information
- Autopilot Serial Number(s)
- 24-3707
- Organization that your autopilot was purchased though
- DBRAIN
Comment Wall
- No comments yet!
About
Share
© 2024 Created by MicroPilotNingAdmin.
Powered by
