MicroPilot

MicroPilot Autopilot Users Group

Hello Micropilot team!

I've been looking throughout the manuals but I haven't found this piece of information: is the Autopilot ready condition (that triggers the READY cell at the bottom of Horizon's screen turning green) stored in any field, available for reading? I'd like to use it to turn a LED on to have a visual confirmation of the ready status.

Thank you very much!

Mario, HELICAMPRO

Views: 101

Reply to This

Replies to This Discussion

Hi Mario,

The Ready state as indicated in Horizon is not saved in a field and just transmitted through telemetry.
You can tell if an autopilot is Ready by looking at the [kount] (1063) field.

When [kount] is greater than 155 the autopilot is ready. That field will begin counting up at 5hz during initialization.

Evan Schellenberg

MicroPilot Support

RSS

Share

© 2024   Created by MicroPilotNingAdmin.   Powered by

Report an Issue  |  Terms of Service